Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrason® E 6020 P - PESU - BASF

Material Data Center offers the following functions for Ultrason® E 6020 P:
unit conversion, PDF datasheet print, comparison with other plastics, application examples, CAE Interfaces

Check here, which other Ultrason E datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Polyethersulfone flakes, e.g. for membrane applications and coatings.
Abbreviated designation according to ISO 1043-1: PESU
기계적 특성건조/응축단위시험규격
ISO 데이터
인장탄성률 - / 2650 MPa ISO 527
항복강도 - / 85 MPa ISO 527
항복변형률 - / 6.9 % ISO 527
챠피 충격 강도 , +23°C - / N kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C - / 7.5 kJ/m² ISO 179/1eA
ASTM 데이터
굴곡 계수 2599 / - MPa ASTM D 790
열적 특성건조/응축단위시험규격
ISO 데이터
유리 전이 온도, 10 °C/min 225 / * °C ISO 11357-1/-2
하중하에서의 변형온도, 1.80 MPa 207 / * °C ISO 75-1/-2
ASTM 데이터
녹는점 225 °C ASTM D 3418
기타 특성건조/응축단위시험규격
조건에서의 흡습성 1 / * % ISO 62와 유사
밀도 1370 kg/m³ ASTM D 792
물질의 비성질건조/응축단위시험규격
ISO 데이터
점도수 81 / * cm³/g ISO 307, 1157, 1628
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.